ge12 05-p1j ge12 07-p1j ge12 09-p1j ge12 12-p1j ge12 15-p1j ge12 18- p1j ge12 24-p1j i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i i power supply main body order no. safety model no. dc voltage note.2 rated current output setup, rise, hold up time voltage range frequency range efficiency (typ.) ac current input inrush current (max.) leakage current (max.) safety standards safety & emc working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf life dimension others dc output note plug cable overload over voltage 9v 7.5v 5v 12v 15v 18v 24v 1.33a 1.33a 2.0a 1.0a 0.8a 0.83a 0.625a current range 0 ~ 1.33a 0 ~ 1.33a 0 ~ 2.0a 0 ~ 1.0a 0 ~ 0.8a 0 ~ 0.83a 0 ~ 0.625a ripple & noise (max.) note.3 100mvp-p 75mvp-p 50mvp-p 120mvp-p 150mvp-p 180mvp-p 240mvp-p voltage tolerance note.4 line regulation note.5 load regulation note.6 3.0% 3.0% 1.0% 1.0% 1.0% 1.0% 1.0% 5.0% 5.0% 5.0% 5.0% 1.0% 1.0% 5.0% 5.0% 3.0% 3.0% 3.0% 3.0% 3.0% 3.0% 4000ms, 100ms, 30ms / 230vac at full load 4000ms, 100ms, 10ms / 115vac 90 ~ 264vac 135 ~ 370vdc 47 ~ 63hz 0.4 a / 230vac a / 100vac 0.25 cold start 40a / 100vac 80a / 230vac 0.25ma / 240vac 110% ~ 200% rated output power 115% ~ 135% withstand voltage isolation resistance 100khrs min. mil-hdbk-217f (25 ) 2 years : 100% load 30 , 8 hours / day -10 ~ +50 (refer to "derating curve") 20% ~ 90% rh non-condensing -20 ~ +85 , 10 ~ 95% rh 0.03% / (0 ~ 40 ) 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each along x, y, z axes ul60950-1, csa c22.2, tuv en60950 -1, ccc gb4943 approved 70.7*40*38.8mm (l*w*h) 1.all parameters are specified at 230vac input, rated load, 25 70% rh ambi ent. 2.dc voltage: the output voltage set at point measure by plug terminal & 50% lo ad. 3.ripple & noise are measured at 20mhz by using a 12" twisted pair terminated w ith a 0.1uf & 47uf capacitor. 4.tolerance: includes set up tolerance, line regulation, load regul ation. 5.line regulation is measured from low line to high line at rated load. 6.load regulation is measured from 10% to 100% rated load 7.main body unit and ac inlet plug should be ordered seperately ; it needs to be us ed along with any of the ac inlet plug. connector fra012-s05- fra012-s07- fra012-s09- fra012-s12- fra012- s15- fra012-s18- fra012-s24- rated power 12w 12w 12w 10w 10w 15w 15w standard type p1j: 2.1 * 5.5 * 11mm turning fork type, center positive for st ock ; other type available by customer requested see page2 features : protection type : hiccup mode, recovers automatically after fault con dition is removed protection type : clamp by zener diode environment protection 10 ~ 15w ac-dc single output interchangeable wall-mounted type g e 1 2 s e r i e s interchangeable ac plugs (plug kit sold seperately)universal ac input / full range no load power consumption< 0.3w erp step2 compliant meet eisa 2007 (energy independence and security act) for 5~24v class power (without earth pin) protections: short circuit / overload / over voltage fully enclosed plastic case led indicator for power on pass lps approvals: ul / cul / tuv / ccc / cb / fcc / ce / c-tick 2 years warranty i/p-o/p:4242vdc i/p-o/p: / 25 / 70% rh 100m ohms / 500vdc compliance to en55022 class b , en61000-3-2,3, fcc part15, gb9254 compliance to en61000-4-2,3,4,5,6,8,11, l criteria a ight industry level, packing 97g ; 60pcs / 6.88kg / carton file name:ge12-spec 2011-06-14 79% 77% 74% 81% 82% 83% 83% specification type order no. australian type u.k type european type us type mix four type ac plug-au ac plug-uk ac plug-eu ac plug-us ac plug-mix ac inlet plug emc immunity emc emission
mechanical specification file name:ge12-spec 2011-06-14 awm2468 20awg*2c 1500 50mm static characteristics 11 0.5mm 40 38.8 29.8 70.7 90 100 120 115 160 140 200 180 240 220 264 load (%) 90 100 80 70 60 50 40 95 derating curve unit:mm ta ( ) load (%) -10 10 20 30 40 75 50 100 50 id 2.1 x od 5.5 c"+" 10 ~ 15w ac-dc single output interchangeable wall-mounted type g e 1 2 s e r i e s plug assignment standard plug: p1j p/n center output + p1j
|
